Remove/install accelerator pedal

From W220 S-Class Encyclopedia
Jump to: navigation, search

Remove/install accelerator pedal

W220 remove install accelerator pedal.png
  • 33 - Accelerator pedal
  • B37 - Accelerator pedal sensor
  • S16/6 - Kickdown switch
  1. Remove key from electronic ignition switch (EIS). Vehicles with code (889) Keyless-Go: Switch engine off, remove Keyless-Go cards from the vehicle and store outside of the transmitter range.
  2. Remove front left covering under dashboard.
  3. Remove mounting nut (arrow) from accelerator pedal (33). The accelerator pedal must not be disassembled otherwise it can get damaged. Installation: Accelerator pedal must be inserted with front guide lug (arrow) into firewall.
  4. Detach connector from accelerator pedal sensor (B37)
  5. Detach connector from kickdown switch (S16/6)
  6. Install in the reverse order