https://w220.wiki/index.php?title=Airmatic&feed=atom&action=history
Airmatic - Revision history
2024-03-29T09:45:10Z
Revision history for this page on the wiki
MediaWiki 1.41.0
https://w220.wiki/index.php?title=Airmatic&diff=8893&oldid=prev
Pokseva: /* Parts */ Chinese valve block - poor reliability
2023-04-07T21:48:08Z
<p><span dir="auto"><span class="autocomment">Parts: </span> Chinese valve block - poor reliability</span></p>
<table style="background-color: #fff; color: #202122;" data-mw="interface">
<col class="diff-marker" />
<col class="diff-content" />
<col class="diff-marker" />
<col class="diff-content" />
<tr class="diff-title" lang="en">
<td colspan="2" style="background-color: #fff; color: #202122; text-align: center;">← Older revision</td>
<td colspan="2" style="background-color: #fff; color: #202122; text-align: center;">Revision as of 23:48, 7 April 2023</td>
</tr><tr><td colspan="2" class="diff-lineno" id="mw-diff-left-l464">Line 464:</td>
<td colspan="2" class="diff-lineno">Line 464:</td></tr>
<tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>It is a common fault for the valve block to fail open. A new valve block unit (A2203200258) costs around EUR 290.</div></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>It is a common fault for the valve block to fail open. A new valve block unit (A2203200258) costs around EUR 290.</div></td></tr>
<tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>In case of o-ring failure, they can be replaced (see the valve block o-ring repair kits available in the section below).</div></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>In case of o-ring failure, they can be replaced (see the valve block o-ring repair kits available in the section below).</div></td></tr>
<tr><td class="diff-marker" data-marker="−"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div>Cheap Chinese clones made of plastic are available on Aliexpress, but in our experience they started to leak in less than a year of operation.</div></td><td class="diff-marker" data-marker="+"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>Cheap Chinese clones made of plastic are available on Aliexpress, but in our experience they started to leak in less than a year of operation <ins style="font-weight: bold; text-decoration: none;">and the lifetime of the pressure sensor is around two years</ins>.</div></td></tr>
<tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><br></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><br></td></tr>
<tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>{|</div></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>{|</div></td></tr>
</table>
Pokseva
https://w220.wiki/index.php?title=Airmatic&diff=8890&oldid=prev
Pokseva: /* Remove/install rear suspension strut */ hint about level control switch
2023-03-05T13:35:00Z
<p><span dir="auto"><span class="autocomment">Remove/install rear suspension strut: </span> hint about level control switch</span></p>
<table style="background-color: #fff; color: #202122;" data-mw="interface">
<col class="diff-marker" />
<col class="diff-content" />
<col class="diff-marker" />
<col class="diff-content" />
<tr class="diff-title" lang="en">
<td colspan="2" style="background-color: #fff; color: #202122; text-align: center;">← Older revision</td>
<td colspan="2" style="background-color: #fff; color: #202122; text-align: center;">Revision as of 15:35, 5 March 2023</td>
</tr><tr><td colspan="2" class="diff-lineno" id="mw-diff-left-l1837">Line 1,837:</td>
<td colspan="2" class="diff-lineno">Line 1,837:</td></tr>
<tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div># Reattach wheel</div></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div># Reattach wheel</div></td></tr>
<tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div># Screw pressure line connection (41a)</div></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div># Screw pressure line connection (41a)</div></td></tr>
<tr><td class="diff-marker" data-marker="−"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div># Fill suspension struts affected using [[DAS]]. Pressurize to 5 bar. '''''Warning:''''' During recharging the wheels should never be in contact with the floor; refilling with the suspension compressed leads to destruction of the air suspension bellows in the strut (41). If [[DAS]] is not available, start the car and check that the strut gets pressurized. If the strut is not being pressurized, stop the car, lock, unlock and start the car again.</div></td><td class="diff-marker" data-marker="+"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div># Fill suspension struts affected using [[DAS]]. Pressurize to 5 bar. '''''Warning:''''' During recharging the wheels should never be in contact with the floor; refilling with the suspension compressed leads to destruction of the air suspension bellows in the strut (41). If [[DAS]] is not available, start the car and check that the strut gets pressurized. If the strut is not being pressurized, stop the car, lock, unlock and start the car again<ins style="font-weight: bold; text-decoration: none;">. Operate Level Control Switch (N72/1s2) to force strut height adjustment</ins>.</div></td></tr>
<tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div># Release the car from the jack slowly to check that the strut has enough pressure. Do not release the wheels fully before the struct has enough pressure.</div></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div># Release the car from the jack slowly to check that the strut has enough pressure. Do not release the wheels fully before the struct has enough pressure.</div></td></tr>
<tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div># Check that the car is on the ground and the vehicle is fully supported on the new strut.</div></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div># Check that the car is on the ground and the vehicle is fully supported on the new strut.</div></td></tr>
</table>
Pokseva
https://w220.wiki/index.php?title=Airmatic&diff=8889&oldid=prev
Pokseva: /* Remove/install rear suspension strut */ more precise installation instructions
2023-03-05T13:29:02Z
<p><span dir="auto"><span class="autocomment">Remove/install rear suspension strut: </span> more precise installation instructions</span></p>
<table style="background-color: #fff; color: #202122;" data-mw="interface">
<col class="diff-marker" />
<col class="diff-content" />
<col class="diff-marker" />
<col class="diff-content" />
<tr class="diff-title" lang="en">
<td colspan="2" style="background-color: #fff; color: #202122; text-align: center;">← Older revision</td>
<td colspan="2" style="background-color: #fff; color: #202122; text-align: center;">Revision as of 15:29, 5 March 2023</td>
</tr><tr><td colspan="2" class="diff-lineno" id="mw-diff-left-l1802">Line 1,802:</td>
<td colspan="2" class="diff-lineno">Line 1,802:</td></tr>
<tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>|}</div></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>|}</div></td></tr>
<tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><br></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><br></td></tr>
<tr><td colspan="2" class="diff-side-deleted"></td><td class="diff-marker" data-marker="+"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins style="font-weight: bold; text-decoration: none;">Removal:</ins></div></td></tr>
<tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div># Depressurize suspension strut concerned (41) using [[DAS]]. ''(Note: it is not strictly necessary to do this step - just be careful when opening the pressure line to release any residual air slowly.)'' </div></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div># Depressurize suspension strut concerned (41) using [[DAS]]. ''(Note: it is not strictly necessary to do this step - just be careful when opening the pressure line to release any residual air slowly.)'' </div></td></tr>
<tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div># ''Remove [[fuses|f32]]/40A (AIRmatic compressor fuse) from the relay box in engine compartment right. This is not strictly necessary, as the compressor should not engage if engine is not running.''</div></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div># ''Remove [[fuses|f32]]/40A (AIRmatic compressor fuse) from the relay box in engine compartment right. This is not strictly necessary, as the compressor should not engage if engine is not running.''</div></td></tr>
<tr><td class="diff-marker" data-marker="−"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div># Jack up <del style="font-weight: bold; text-decoration: none;">the rear or just </del>one side of the car as required. Support the car on stands.</div></td><td class="diff-marker" data-marker="+"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div># Jack up one side of the car as required. Support the car on stands.</div></td></tr>
<tr><td class="diff-marker" data-marker="−"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div># Remove rear wheel<del style="font-weight: bold; text-decoration: none;">(s)</del>.</div></td><td class="diff-marker" data-marker="+"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div># Remove rear wheel.</div></td></tr>
<tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div># Remove cover (arrow) in parcel shelf. ''To avoid damage to the trim on the C-pillar it is best to remove it as it '''certainly will be damaged (bruised/compressed and possibly dirtied)''' if not removed. To remove C-pillar unscrew T30 bolt under SRS tab and pull it off.''</div></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div># Remove cover (arrow) in parcel shelf. ''To avoid damage to the trim on the C-pillar it is best to remove it as it '''certainly will be damaged (bruised/compressed and possibly dirtied)''' if not removed. To remove C-pillar unscrew T30 bolt under SRS tab and pull it off.''</div></td></tr>
<tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>#: [[File:W220 Damage to C-Pillar Trim Removing AIRmatic Rear Strut with Annotation.JPG|thumb|none|Damaged C-pillar]]</div></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>#: [[File:W220 Damage to C-Pillar Trim Removing AIRmatic Rear Strut with Annotation.JPG|thumb|none|Damaged C-pillar]]</div></td></tr>
<tr><td colspan="2" class="diff-lineno" id="mw-diff-left-l1811">Line 1,811:</td>
<td colspan="2" class="diff-lineno">Line 1,812:</td></tr>
<tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div># Unscrew pressure line connection (41a) ''using 10mm open ended spanner''. '''''Be warned''': pressure in the line between the valve block and the suspension strut can be very high so if pressure has not been released using [[DAS]], '''slowly''' unscrew the valve allowing the residual pressure to escape. (The residual pressure valve on the top of the strut prevents the release of the last bit of pressure. Residual pressure in suspension strut is up to 3.5 bar. This means that the strut will still exert considerable force on the suspension components.)''</div></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div># Unscrew pressure line connection (41a) ''using 10mm open ended spanner''. '''''Be warned''': pressure in the line between the valve block and the suspension strut can be very high so if pressure has not been released using [[DAS]], '''slowly''' unscrew the valve allowing the residual pressure to escape. (The residual pressure valve on the top of the strut prevents the release of the last bit of pressure. Residual pressure in suspension strut is up to 3.5 bar. This means that the strut will still exert considerable force on the suspension components.)''</div></td></tr>
<tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div># Plug the pressure line for the duration of the repair operations ''(just to make sure that dirt does not get in)''.</div></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div># Plug the pressure line for the duration of the repair operations ''(just to make sure that dirt does not get in)''.</div></td></tr>
<tr><td class="diff-marker" data-marker="−"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div># Unscrew nuts (41b) ''using the smallest 13mm socket and driver available<del style="font-weight: bold; text-decoration: none;">''. Installation: ''Loosely'' fit nuts (41b) then refill suspension strut in fully-assembled vehicle before torquing to specification ''(the vehicle must be in the ready to drive mode when torquing these three nuts)</del>''.</div></td><td class="diff-marker" data-marker="+"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div># Unscrew nuts (41b) ''using the smallest 13mm socket and driver available''.</div></td></tr>
<tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div># Pull off grommet and disconnect electrical connector of damping valve unit (Y53x1/ Y54x1)</div></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div># Pull off grommet and disconnect electrical connector of damping valve unit (Y53x1/ Y54x1)</div></td></tr>
<tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div># Remove bolts ''(or plastic rivets)'' (72d) on spring control arm cover (72c). ''Remove spring control arm cover (72c).''</div></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div># Remove bolts ''(or plastic rivets)'' (72d) on spring control arm cover (72c). ''Remove spring control arm cover (72c).''</div></td></tr>
<tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div># ''Detach brake caliper from the wheel. Disconnect brake wear sensor and remove brake wear sensor bracket (right side only). The removal of brake caliper is not strictly necessary if vehicle is lifted high and hence there is enough space to pull out the strut downwards.''</div></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div># ''Detach brake caliper from the wheel. Disconnect brake wear sensor and remove brake wear sensor bracket (right side only). The removal of brake caliper is not strictly necessary if vehicle is lifted high and hence there is enough space to pull out the strut downwards.''</div></td></tr>
<tr><td class="diff-marker" data-marker="−"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div># ''Remove stabilizer bar link bottom nut and <del style="font-weight: bold; text-decoration: none;">detach </del>the bottom part of the stabilizer bar.''</div></td><td class="diff-marker" data-marker="+"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div># ''Remove stabilizer bar link bottom nut <ins style="font-weight: bold; text-decoration: none;">using 16mm socket </ins>and <ins style="font-weight: bold; text-decoration: none;">22mm wrench. Detach </ins>the bottom part of the stabilizer bar.''</div></td></tr>
<tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>#: [[File:W220 Stabiliser Bar Link Removing Bottom Nut.jpg|thumb|none|Removal of stabilizer bar link bottom]]</div></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>#: [[File:W220 Stabiliser Bar Link Removing Bottom Nut.jpg|thumb|none|Removal of stabilizer bar link bottom]]</div></td></tr>
<tr><td class="diff-marker" data-marker="−"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div># Remove bolted connection (2) of suspension strut (41) on spring control arm (72) <del style="font-weight: bold; text-decoration: none;">''</del>using 21mm socket from both sides<del style="font-weight: bold; text-decoration: none;">''</del>. <del style="font-weight: bold; text-decoration: none;">(''Note: Any </del>residual pressure in the strut will prevent the bolt from being removed.<del style="font-weight: bold; text-decoration: none;">'') Installation: Fit nuts </del>(<del style="font-weight: bold; text-decoration: none;">41b</del>) <del style="font-weight: bold; text-decoration: none;">and tighten after filling the suspension strut on a vehicle which is ready </del>to <del style="font-weight: bold; text-decoration: none;">drive ''(or ensure that rear axle is horizontal by jacking under </del>the <del style="font-weight: bold; text-decoration: none;">rear brake disc with the wheel removed and measuring distance between lower edge of fender and center of axle (about 360mm) before torquing connection rear strut to spring control arm (2) of suspension)''</del>.</div></td><td class="diff-marker" data-marker="+"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div># Remove bolted connection (2) of suspension strut (41) on spring control arm (72) using 21mm socket from both sides. <ins style="font-weight: bold; text-decoration: none;">The </ins>residual pressure in the strut will prevent the bolt from being removed. <ins style="font-weight: bold; text-decoration: none;">Use unscrewing </ins>(<ins style="font-weight: bold; text-decoration: none;">instead of pulling</ins>) to <ins style="font-weight: bold; text-decoration: none;">remove </ins>the <ins style="font-weight: bold; text-decoration: none;">bolt</ins>.</div></td></tr>
<tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>#: [[File:W220 Removing rear strut to spring control arm connection.jpg|thumb|none|Removing strut to spring control arm connection.]]</div></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>#: [[File:W220 Removing rear strut to spring control arm connection.jpg|thumb|none|Removing strut to spring control arm connection.]]</div></td></tr>
<tr><td class="diff-marker" data-marker="−"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div># Remove bolted connection (<del style="font-weight: bold; text-decoration: none;">3</del>) of thrust arm (4) on rear axle carrier. ''<del style="font-weight: bold; text-decoration: none;">This </del>step is not <del style="font-weight: bold; text-decoration: none;">strictly </del>necessary as even without loosening this bolt the string control arm should easily swing out of the way for the strut removal.</div></td><td class="diff-marker" data-marker="+"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div># Remove bolted connection (<ins style="font-weight: bold; text-decoration: none;">1</ins>) of thrust arm (4) on rear axle carrier. ''<ins style="font-weight: bold; text-decoration: none;">In practice, this </ins>step is not necessary as even without loosening this bolt the string control arm should easily swing out of the way for the strut removal.</div></td></tr>
<tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>#: [[File:W220 Spring Control Arm to Axle Carrier Inner bolted connection.jpg|thumb|none|Loosening the inner bolted connection of spring control arm to axle carrier]]</div></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>#: [[File:W220 Spring Control Arm to Axle Carrier Inner bolted connection.jpg|thumb|none|Loosening the inner bolted connection of spring control arm to axle carrier]]</div></td></tr>
<tr><td class="diff-marker" data-marker="−"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div># Remove bolted connection <del style="font-weight: bold; text-decoration: none;">(1) </del>of spring control arm (72) on rear <del style="font-weight: bold; text-decoration: none;">axle </del>carrier <del style="font-weight: bold; text-decoration: none;">''</del>using 21mm socket from <del style="font-weight: bold; text-decoration: none;">both sides''</del>. <del style="font-weight: bold; text-decoration: none;">''Any </del>residual pressure in the strut will prevent the bolt from being <del style="font-weight: bold; text-decoration: none;">easily </del>removed. <del style="font-weight: bold; text-decoration: none;">Jack the spring control arm slightly </del>to remove <del style="font-weight: bold; text-decoration: none;">the pressure on the spring control arm to wheel carrier bolted connection. If there is no residual pressure in the strut </del>the bolt <del style="font-weight: bold; text-decoration: none;">can be released just by wriggling the wheel carrier.'' ''Installation: Ensure rear axle is horizontal before torquing connection outer spring control arm to wheel carrier</del>.<del style="font-weight: bold; text-decoration: none;">''</del></div></td><td class="diff-marker" data-marker="+"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div># Remove bolted connection of spring control arm (72) on rear <ins style="font-weight: bold; text-decoration: none;">wheel </ins>carrier <ins style="font-weight: bold; text-decoration: none;">(</ins>using 21mm socket from <ins style="font-weight: bold; text-decoration: none;">one side and Torx E18 socket from the other)</ins>. <ins style="font-weight: bold; text-decoration: none;">The </ins>residual pressure in the strut will prevent the bolt from being removed. <ins style="font-weight: bold; text-decoration: none;">Use unscrewing (instead of pulling) </ins>to remove the bolt.</div></td></tr>
<tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>#: [[File:W220 Undoing spring control arm to wheel carrier bolted connection.jpg|thumb|none|Undoing spring control arm to wheel carrier bolted connection]]</div></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>#: [[File:W220 Undoing spring control arm to wheel carrier bolted connection.jpg|thumb|none|Undoing spring control arm to wheel carrier bolted connection]]</div></td></tr>
<tr><td class="diff-marker" data-marker="−"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div><del style="font-weight: bold; text-decoration: none;"># ''Lower the jack just enough to remove the pressure on the spring control arm caused by the strut. Remove the bolt for the rear strut to spring control arm connection. Lower the jack which will allow the spring control arm (72) to swing out of the way.''</del></div></td><td colspan="2" class="diff-side-added"></td></tr>
<tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div># Pull down track control arm (72) and remove strut assembly (41) by lowering it and pulling it out to the side.</div></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div># Pull down track control arm (72) and remove strut assembly (41) by lowering it and pulling it out to the side.</div></td></tr>
<tr><td class="diff-marker" data-marker="−"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div># Install in the <del style="font-weight: bold; text-decoration: none;">reverse order</del></div></td><td class="diff-marker" data-marker="+"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div> </div></td></tr>
<tr><td class="diff-marker" data-marker="−"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div># Fill suspension struts affected using [[DAS]]. Pressurize to 5 bar. '''''Warning:''''' During recharging the wheels should never be in contact with the floor; refilling with the suspension compressed leads to destruction of the air suspension bellows in the strut (41).</div></td><td class="diff-marker" data-marker="+"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins style="font-weight: bold; text-decoration: none;">Installation:</ins></div></td></tr>
<tr><td class="diff-marker" data-marker="−"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div># <del style="font-weight: bold; text-decoration: none;">''Double </del>check that the strut <del style="font-weight: bold; text-decoration: none;">top mounting nuts (41b) were torqued correctly after </del>the vehicle <del style="font-weight: bold; text-decoration: none;">was ready to drive and </del>fully supported on the new <del style="font-weight: bold; text-decoration: none;">struts</del>.<del style="font-weight: bold; text-decoration: none;">''</del></div></td><td class="diff-marker" data-marker="+"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div># Install <ins style="font-weight: bold; text-decoration: none;">strut by ''loosely'' fitting nuts (41b). (The vehicle must be </ins>in the <ins style="font-weight: bold; text-decoration: none;">ready to drive mode when torquing these three nuts.)</ins></div></td></tr>
<tr><td class="diff-marker" data-marker="−"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div># <del style="font-weight: bold; text-decoration: none;">''</del>Check for leaks<del style="font-weight: bold; text-decoration: none;">.''</del></div></td><td class="diff-marker" data-marker="+"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins style="font-weight: bold; text-decoration: none;"># Install bolted connection (2) of suspension strut (41) on spring control arm (72). (The vehicle must be in the ready to drive mode when torquing this bolt.)</ins></div></td></tr>
<tr><td colspan="2" class="diff-side-deleted"></td><td class="diff-marker" data-marker="+"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins style="font-weight: bold; text-decoration: none;"># Install bolted connection (1) of thrust arm (4) on rear axle carrier (if this bolt was loosened or removed). (The vehicle must be in the ready to drive mode when torquing this bolt.)</ins></div></td></tr>
<tr><td colspan="2" class="diff-side-deleted"></td><td class="diff-marker" data-marker="+"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins style="font-weight: bold; text-decoration: none;"># Reattach stabilizer bar link bottom nut</ins></div></td></tr>
<tr><td colspan="2" class="diff-side-deleted"></td><td class="diff-marker" data-marker="+"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins style="font-weight: bold; text-decoration: none;"># Install bolted connection of spring control arm (72) and wheel carrier by wriggling the wheel carrier (use a jack to raise spring control arm as needed). (The vehicle must be in the ready to drive mode when torquing this bolt.)</ins></div></td></tr>
<tr><td colspan="2" class="diff-side-deleted"></td><td class="diff-marker" data-marker="+"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins style="font-weight: bold; text-decoration: none;"># Route strut's electrical line and reconnect connector of damping valve unit (Y53x1/ Y54x1)</ins></div></td></tr>
<tr><td colspan="2" class="diff-side-deleted"></td><td class="diff-marker" data-marker="+"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins style="font-weight: bold; text-decoration: none;"># Attach spring control arm cover (72c)</ins></div></td></tr>
<tr><td colspan="2" class="diff-side-deleted"></td><td class="diff-marker" data-marker="+"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins style="font-weight: bold; text-decoration: none;"># Reattach brake caliper (if was removed)</ins></div></td></tr>
<tr><td colspan="2" class="diff-side-deleted"></td><td class="diff-marker" data-marker="+"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins style="font-weight: bold; text-decoration: none;"># Reattach wheel</ins></div></td></tr>
<tr><td colspan="2" class="diff-side-deleted"></td><td class="diff-marker" data-marker="+"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins style="font-weight: bold; text-decoration: none;"># Screw pressure line connection (41a)</ins></div></td></tr>
<tr><td colspan="2" class="diff-side-deleted"></td><td class="diff-marker" data-marker="+"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div># Fill suspension struts affected using [[DAS]]. Pressurize to 5 bar. '''''Warning:''''' During recharging the wheels should never be in contact with the floor; refilling with the suspension compressed leads to destruction of the air suspension bellows in the strut (41)<ins style="font-weight: bold; text-decoration: none;">. If [[DAS]] is not available, start the car and check that the strut gets pressurized. If the strut is not being pressurized, stop the car, lock, unlock and start the car again</ins>.</div></td></tr>
<tr><td colspan="2" class="diff-side-deleted"></td><td class="diff-marker" data-marker="+"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div># <ins style="font-weight: bold; text-decoration: none;">Release the car from the jack slowly to </ins>check that the strut <ins style="font-weight: bold; text-decoration: none;">has enough pressure. Do not release the wheels fully before the struct has enough pressure.</ins></div></td></tr>
<tr><td colspan="2" class="diff-side-deleted"></td><td class="diff-marker" data-marker="+"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins style="font-weight: bold; text-decoration: none;"># Check that the car is on the ground and </ins>the vehicle <ins style="font-weight: bold; text-decoration: none;">is </ins>fully supported on the new <ins style="font-weight: bold; text-decoration: none;">strut.</ins></div></td></tr>
<tr><td colspan="2" class="diff-side-deleted"></td><td class="diff-marker" data-marker="+"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins style="font-weight: bold; text-decoration: none;"># Torque three fitting nuts (41b).</ins></div></td></tr>
<tr><td colspan="2" class="diff-side-deleted"></td><td class="diff-marker" data-marker="+"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins style="font-weight: bold; text-decoration: none;"># Attach cover (arrow) in parcel shelf. Reattach C-pillar</ins>.</div></td></tr>
<tr><td colspan="2" class="diff-side-deleted"></td><td class="diff-marker" data-marker="+"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div># <ins style="font-weight: bold; text-decoration: none;">Torque bolted connection (2) of suspension strut (41) on spring control arm (72)</ins></div></td></tr>
<tr><td colspan="2" class="diff-side-deleted"></td><td class="diff-marker" data-marker="+"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins style="font-weight: bold; text-decoration: none;"># Torque bolted connection (1) of thrust arm (4) on rear axle carrier (if this bolt was loosened or removed)</ins></div></td></tr>
<tr><td colspan="2" class="diff-side-deleted"></td><td class="diff-marker" data-marker="+"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins style="font-weight: bold; text-decoration: none;"># Torque bolted connection of spring control arm (72) and wheel carrier</ins></div></td></tr>
<tr><td colspan="2" class="diff-side-deleted"></td><td class="diff-marker" data-marker="+"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins style="font-weight: bold; text-decoration: none;"># </ins>Check for leaks</div></td></tr>
<tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><br></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><br></td></tr>
<tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>Torque specifications: </div></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>Torque specifications: </div></td></tr>
</table>
Pokseva
https://w220.wiki/index.php?title=Airmatic&diff=8888&oldid=prev
Pokseva: /* Remove/install rear suspension strut */ some fixes
2023-02-23T17:16:38Z
<p><span dir="auto"><span class="autocomment">Remove/install rear suspension strut: </span> some fixes</span></p>
<table style="background-color: #fff; color: #202122;" data-mw="interface">
<col class="diff-marker" />
<col class="diff-content" />
<col class="diff-marker" />
<col class="diff-content" />
<tr class="diff-title" lang="en">
<td colspan="2" style="background-color: #fff; color: #202122; text-align: center;">← Older revision</td>
<td colspan="2" style="background-color: #fff; color: #202122; text-align: center;">Revision as of 19:16, 23 February 2023</td>
</tr><tr><td colspan="2" class="diff-lineno" id="mw-diff-left-l1817">Line 1,817:</td>
<td colspan="2" class="diff-lineno">Line 1,817:</td></tr>
<tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div># ''Remove stabilizer bar link bottom nut and detach the bottom part of the stabilizer bar.''</div></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div># ''Remove stabilizer bar link bottom nut and detach the bottom part of the stabilizer bar.''</div></td></tr>
<tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>#: [[File:W220 Stabiliser Bar Link Removing Bottom Nut.jpg|thumb|none|Removal of stabilizer bar link bottom]]</div></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>#: [[File:W220 Stabiliser Bar Link Removing Bottom Nut.jpg|thumb|none|Removal of stabilizer bar link bottom]]</div></td></tr>
<tr><td class="diff-marker" data-marker="−"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div># Remove bolted connection (2) of suspension strut (41) on spring control arm (72) ''using 21mm socket from both sides''. ''Note: Any residual pressure in the strut will prevent the bolt from being removed.'' Installation: Fit nuts (41b) and tighten after filling the suspension strut on a vehicle which is ready to drive ''(or ensure that rear axle is horizontal by jacking under the rear brake disc with the wheel removed and measuring distance between lower edge of fender and center of axle (about 360mm) before torquing connection rear strut to spring control arm (2) of suspension)''.</div></td><td class="diff-marker" data-marker="+"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div># Remove bolted connection (2) of suspension strut (41) on spring control arm (72) ''using 21mm socket from both sides''. <ins style="font-weight: bold; text-decoration: none;">(</ins>''Note: Any residual pressure in the strut will prevent the bolt from being removed.''<ins style="font-weight: bold; text-decoration: none;">) </ins>Installation: Fit nuts (41b) and tighten after filling the suspension strut on a vehicle which is ready to drive ''(or ensure that rear axle is horizontal by jacking under the rear brake disc with the wheel removed and measuring distance between lower edge of fender and center of axle (about 360mm) before torquing connection rear strut to spring control arm (2) of suspension)''.</div></td></tr>
<tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>#: [[File:W220 Removing rear strut to spring control arm connection.jpg|thumb|none|Removing strut to spring control arm connection.]]</div></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>#: [[File:W220 Removing rear strut to spring control arm connection.jpg|thumb|none|Removing strut to spring control arm connection.]]</div></td></tr>
<tr><td class="diff-marker" data-marker="−"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div># Remove bolted connection (3) of <del style="font-weight: bold; text-decoration: none;">spring control </del>arm (<del style="font-weight: bold; text-decoration: none;">72</del>) on rear axle carrier. ''This step is not strictly necessary as even without loosening this bolt the string control arm should easily swing out of the way for the strut removal.</div></td><td class="diff-marker" data-marker="+"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div># Remove bolted connection (3) of <ins style="font-weight: bold; text-decoration: none;">thrust </ins>arm (<ins style="font-weight: bold; text-decoration: none;">4</ins>) on rear axle carrier. ''This step is not strictly necessary as even without loosening this bolt the string control arm should easily swing out of the way for the strut removal.</div></td></tr>
<tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>#: [[File:W220 Spring Control Arm to Axle Carrier Inner bolted connection.jpg|thumb|none|Loosening the inner bolted connection of spring control arm to axle carrier]]</div></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>#: [[File:W220 Spring Control Arm to Axle Carrier Inner bolted connection.jpg|thumb|none|Loosening the inner bolted connection of spring control arm to axle carrier]]</div></td></tr>
<tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div># Remove bolted connection (1) of spring control arm (72) on rear axle carrier ''using 21mm socket from both sides''. ''Any residual pressure in the strut will prevent the bolt from being easily removed. Jack the spring control arm slightly to remove the pressure on the spring control arm to wheel carrier bolted connection. If there is no residual pressure in the strut the bolt can be released just by wriggling the wheel carrier.'' ''Installation: Ensure rear axle is horizontal before torquing connection outer spring control arm to wheel carrier.''</div></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div># Remove bolted connection (1) of spring control arm (72) on rear axle carrier ''using 21mm socket from both sides''. ''Any residual pressure in the strut will prevent the bolt from being easily removed. Jack the spring control arm slightly to remove the pressure on the spring control arm to wheel carrier bolted connection. If there is no residual pressure in the strut the bolt can be released just by wriggling the wheel carrier.'' ''Installation: Ensure rear axle is horizontal before torquing connection outer spring control arm to wheel carrier.''</div></td></tr>
</table>
Pokseva
https://w220.wiki/index.php?title=Airmatic&diff=8830&oldid=prev
Masood at 00:38, 5 January 2023
2023-01-05T00:38:14Z
<p></p>
<table style="background-color: #fff; color: #202122;" data-mw="interface">
<col class="diff-marker" />
<col class="diff-content" />
<col class="diff-marker" />
<col class="diff-content" />
<tr class="diff-title" lang="en">
<td colspan="2" style="background-color: #fff; color: #202122; text-align: center;">← Older revision</td>
<td colspan="2" style="background-color: #fff; color: #202122; text-align: center;">Revision as of 02:38, 5 January 2023</td>
</tr><tr><td colspan="2" class="diff-lineno" id="mw-diff-left-l1763">Line 1,763:</td>
<td colspan="2" class="diff-lineno">Line 1,763:</td></tr>
<tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>Excellent replacement tutorials for the front struts are available here:</div></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>Excellent replacement tutorials for the front struts are available here:</div></td></tr>
<tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>{|</div></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>{|</div></td></tr>
<tr><td colspan="2" class="diff-side-deleted"></td><td class="diff-marker" data-marker="+"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins style="font-weight: bold; text-decoration: none;"></ins></div></td></tr>
<tr><td colspan="2" class="diff-side-deleted"></td><td class="diff-marker" data-marker="+"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins style="font-weight: bold; text-decoration: none;">|{{#ev:youtube|https://youtube.com/watch?v=5guGcaMabxw&si=EnSIkaIECMiOmarE|320|left|Front Air shock replacement (By Masood)|frame}}</ins></div></td></tr>
<tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>|{{#ev:youtube|https://www.youtube.com/watch?v=WJ8Q3DuKH8M|320|left|Front air shock replacement (by Arnott)|frame}}</div></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>|{{#ev:youtube|https://www.youtube.com/watch?v=WJ8Q3DuKH8M|320|left|Front air shock replacement (by Arnott)|frame}}</div></td></tr>
<tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>|{{#ev:youtube|https://www.youtube.com/watch?v=hiYy3fgpl0k|320|left|Front air shock replacement (by BILSTEIN)|frame}}</div></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>|{{#ev:youtube|https://www.youtube.com/watch?v=hiYy3fgpl0k|320|left|Front air shock replacement (by BILSTEIN)|frame}}</div></td></tr>
</table>
Masood
https://w220.wiki/index.php?title=Airmatic&diff=8797&oldid=prev
Pokseva: /* Level Control Valve Unit (Y36/6) */ added a note about low quality Chinese clones
2022-07-05T22:43:38Z
<p><span dir="auto"><span class="autocomment">Level Control Valve Unit (Y36/6): </span> added a note about low quality Chinese clones</span></p>
<table style="background-color: #fff; color: #202122;" data-mw="interface">
<col class="diff-marker" />
<col class="diff-content" />
<col class="diff-marker" />
<col class="diff-content" />
<tr class="diff-title" lang="en">
<td colspan="2" style="background-color: #fff; color: #202122; text-align: center;">← Older revision</td>
<td colspan="2" style="background-color: #fff; color: #202122; text-align: center;">Revision as of 00:43, 6 July 2022</td>
</tr><tr><td colspan="2" class="diff-lineno" id="mw-diff-left-l464">Line 464:</td>
<td colspan="2" class="diff-lineno">Line 464:</td></tr>
<tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>It is a common fault for the valve block to fail open. A new valve block unit (A2203200258) costs around EUR 290.</div></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>It is a common fault for the valve block to fail open. A new valve block unit (A2203200258) costs around EUR 290.</div></td></tr>
<tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>In case of o-ring failure, they can be replaced (see the valve block o-ring repair kits available in the section below).</div></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>In case of o-ring failure, they can be replaced (see the valve block o-ring repair kits available in the section below).</div></td></tr>
<tr><td class="diff-marker" data-marker="−"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div>Cheap Chinese clones made of plastic are available on Aliexpress.</div></td><td class="diff-marker" data-marker="+"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>Cheap Chinese clones made of plastic are available on Aliexpress<ins style="font-weight: bold; text-decoration: none;">, but in our experience they started to leak in less than a year of operation</ins>.</div></td></tr>
<tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><br></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><br></td></tr>
<tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>{|</div></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>{|</div></td></tr>
</table>
Pokseva
https://w220.wiki/index.php?title=Airmatic&diff=8796&oldid=prev
Pokseva: /* Compressor Relay (K40/7kO) */
2022-07-05T18:04:14Z
<p><span dir="auto"><span class="autocomment">Compressor Relay (K40/7kO)</span></span></p>
<table style="background-color: #fff; color: #202122;" data-mw="interface">
<col class="diff-marker" />
<col class="diff-content" />
<col class="diff-marker" />
<col class="diff-content" />
<tr class="diff-title" lang="en">
<td colspan="2" style="background-color: #fff; color: #202122; text-align: center;">← Older revision</td>
<td colspan="2" style="background-color: #fff; color: #202122; text-align: center;">Revision as of 20:04, 5 July 2022</td>
</tr><tr><td colspan="2" class="diff-lineno" id="mw-diff-left-l301">Line 301:</td>
<td colspan="2" class="diff-lineno">Line 301:</td></tr>
<tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>The relay starts and stops the Airmatic compressor.</div></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>The relay starts and stops the Airmatic compressor.</div></td></tr>
<tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>A faulty relay may cause the compressor to overheat thus damaging it.</div></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>A faulty relay may cause the compressor to overheat thus damaging it.</div></td></tr>
<tr><td class="diff-marker" data-marker="−"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div>Hella relays have proven to be reliable. Part number 4RA 007 791-011 (<del style="font-weight: bold; text-decoration: none;">A0025427219</del>).</div></td><td class="diff-marker" data-marker="+"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>Hella relays have proven to be reliable. Part number 4RA 007 791-011 (<ins style="font-weight: bold; text-decoration: none;">A0025421319</ins>).</div></td></tr>
<tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><br></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><br></td></tr>
<tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div><!-- AR32.22-P-2001I --></div></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div><!-- AR32.22-P-2001I --></div></td></tr>
</table>
Pokseva
https://w220.wiki/index.php?title=Airmatic&diff=8795&oldid=prev
Pokseva: /* Compressor Relay (K40/7kO) */ updated part number for Airmatic relay
2022-07-05T18:03:38Z
<p><span dir="auto"><span class="autocomment">Compressor Relay (K40/7kO): </span> updated part number for Airmatic relay</span></p>
<table style="background-color: #fff; color: #202122;" data-mw="interface">
<col class="diff-marker" />
<col class="diff-content" />
<col class="diff-marker" />
<col class="diff-content" />
<tr class="diff-title" lang="en">
<td colspan="2" style="background-color: #fff; color: #202122; text-align: center;">← Older revision</td>
<td colspan="2" style="background-color: #fff; color: #202122; text-align: center;">Revision as of 20:03, 5 July 2022</td>
</tr><tr><td colspan="2" class="diff-lineno" id="mw-diff-left-l301">Line 301:</td>
<td colspan="2" class="diff-lineno">Line 301:</td></tr>
<tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>The relay starts and stops the Airmatic compressor.</div></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>The relay starts and stops the Airmatic compressor.</div></td></tr>
<tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>A faulty relay may cause the compressor to overheat thus damaging it.</div></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>A faulty relay may cause the compressor to overheat thus damaging it.</div></td></tr>
<tr><td class="diff-marker" data-marker="−"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div>Hella relays have proven to be reliable. Part number <del style="font-weight: bold; text-decoration: none;">AR4 </del>007 791-<del style="font-weight: bold; text-decoration: none;">13 </del>(A0025427219).</div></td><td class="diff-marker" data-marker="+"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>Hella relays have proven to be reliable. Part number <ins style="font-weight: bold; text-decoration: none;">4RA </ins>007 791-<ins style="font-weight: bold; text-decoration: none;">011 </ins>(A0025427219).</div></td></tr>
<tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><br></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><br></td></tr>
<tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div><!-- AR32.22-P-2001I --></div></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div><!-- AR32.22-P-2001I --></div></td></tr>
<tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>{|</div></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>{|</div></td></tr>
<tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>|[[File:W220_Airmatic_Suspension_Compressor_Relay.JPG|thumb|none|Airmatic compressor relay in fuse box.]]</div></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>|[[File:W220_Airmatic_Suspension_Compressor_Relay.JPG|thumb|none|Airmatic compressor relay in fuse box.]]</div></td></tr>
<tr><td class="diff-marker" data-marker="−"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div>|[[File:W220 Airmatic Relay K40 7kO.jpg|thumb|none|Airmatic comressor relay (<del style="font-weight: bold; text-decoration: none;">A0025427219</del>).]]</div></td><td class="diff-marker" data-marker="+"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>|[[File:W220 Airmatic Relay K40 7kO.jpg|thumb|none|Airmatic comressor relay (<ins style="font-weight: bold; text-decoration: none;">A0025421319</ins>).]]</div></td></tr>
<tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>|}</div></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>|}</div></td></tr>
<tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><br></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><br></td></tr>
</table>
Pokseva
https://w220.wiki/index.php?title=Airmatic&diff=8721&oldid=prev
Pokseva: /* Force Settings */
2021-11-16T19:27:08Z
<p><span dir="auto"><span class="autocomment">Force Settings</span></span></p>
<table style="background-color: #fff; color: #202122;" data-mw="interface">
<col class="diff-marker" />
<col class="diff-content" />
<col class="diff-marker" />
<col class="diff-content" />
<tr class="diff-title" lang="en">
<td colspan="2" style="background-color: #fff; color: #202122; text-align: center;">← Older revision</td>
<td colspan="2" style="background-color: #fff; color: #202122; text-align: center;">Revision as of 21:27, 16 November 2021</td>
</tr><tr><td colspan="2" class="diff-lineno" id="mw-diff-left-l1063">Line 1,063:</td>
<td colspan="2" class="diff-lineno">Line 1,063:</td></tr>
<tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>|}</div></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>|}</div></td></tr>
<tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><br></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><br></td></tr>
<tr><td class="diff-marker" data-marker="−"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div>The "Actuations" menu under the AIRmatic control module in [[DAS]] can be used to force damping setting for a particular strut. The "Development data" menu (in German) can be used to force damping setting for all struts (F3 - the hardest setting, F6 - the softest setting).</div></td><td class="diff-marker" data-marker="+"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>The "Actuations" menu under the AIRmatic control module in [[DAS]] can be used to force <ins style="font-weight: bold; text-decoration: none;">a </ins>damping setting for a particular strut <ins style="font-weight: bold; text-decoration: none;">regardless of the ride conditions</ins>. The "Development data" menu (in German) can be used to force damping setting for all struts (F3 - the hardest setting, F6 - the softest setting).</div></td></tr>
<tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>{|</div></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>{|</div></td></tr>
<tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>|[[File:W220_DAS_actuation_of_the_right_rear_damper_valves.png|thumb|none|AIRmatic - Actuations - Damper valves - Right rear damper valves]]</div></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>|[[File:W220_DAS_actuation_of_the_right_rear_damper_valves.png|thumb|none|AIRmatic - Actuations - Damper valves - Right rear damper valves]]</div></td></tr>
</table>
Pokseva
https://w220.wiki/index.php?title=Airmatic&diff=8720&oldid=prev
Pokseva: /* Force Settings */ added DAS actuations
2021-11-16T18:58:23Z
<p><span dir="auto"><span class="autocomment">Force Settings: </span> added DAS actuations</span></p>
<table style="background-color: #fff; color: #202122;" data-mw="interface">
<col class="diff-marker" />
<col class="diff-content" />
<col class="diff-marker" />
<col class="diff-content" />
<tr class="diff-title" lang="en">
<td colspan="2" style="background-color: #fff; color: #202122; text-align: center;">← Older revision</td>
<td colspan="2" style="background-color: #fff; color: #202122; text-align: center;">Revision as of 20:58, 16 November 2021</td>
</tr><tr><td colspan="2" class="diff-lineno" id="mw-diff-left-l1061">Line 1,061:</td>
<td colspan="2" class="diff-lineno">Line 1,061:</td></tr>
<tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>| Closed</div></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>| Closed</div></td></tr>
<tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>| Closed</div></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>| Closed</div></td></tr>
<tr><td colspan="2" class="diff-side-deleted"></td><td class="diff-marker" data-marker="+"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins style="font-weight: bold; text-decoration: none;">|}</ins></div></td></tr>
<tr><td colspan="2" class="diff-side-deleted"></td><td class="diff-marker" data-marker="+"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins style="font-weight: bold; text-decoration: none;"></ins></div></td></tr>
<tr><td colspan="2" class="diff-side-deleted"></td><td class="diff-marker" data-marker="+"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins style="font-weight: bold; text-decoration: none;">The "Actuations" menu under the AIRmatic control module in [[DAS]] can be used to force damping setting for a particular strut. The "Development data" menu (in German) can be used to force damping setting for all struts (F3 - the hardest setting, F6 - the softest setting).</ins></div></td></tr>
<tr><td colspan="2" class="diff-side-deleted"></td><td class="diff-marker" data-marker="+"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins style="font-weight: bold; text-decoration: none;">{|</ins></div></td></tr>
<tr><td colspan="2" class="diff-side-deleted"></td><td class="diff-marker" data-marker="+"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins style="font-weight: bold; text-decoration: none;">|[[File:W220_DAS_actuation_of_the_right_rear_damper_valves.png|thumb|none|AIRmatic - Actuations - Damper valves - Right rear damper valves]]</ins></div></td></tr>
<tr><td colspan="2" class="diff-side-deleted"></td><td class="diff-marker" data-marker="+"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins style="font-weight: bold; text-decoration: none;">|[[File:W220_DAS_development_data_FN_Daempfstufe.png|thumb|none|AIRmatic - Development data - Actuations - Complete index of actuations - Dämpfstufe (FN_Daempfstufe)]]</ins></div></td></tr>
<tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>|}</div></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>|}</div></td></tr>
<tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><br></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><br></td></tr>
</table>
Pokseva