Rear seats

Rear seat adjustment

In vehicles equipped with option code ?? the switch can be used to adjust rear head restraint.

In vehicles equipped with option code ?? the switches can be used to adjust rear:

• (1) Seat bench fore and aft adjustment
• (2) Head restraint fold/place upright

In vehicles equipped with option code ?? the switches can be used to adjust rear:

• (1) Seat fore and aft adjustment
• (2) Seat height
• (3) Head restraint fold/place upright

Remove Rear Seat Backrest

Lower the head restraints. There are 2 torx bolts at the bottom of the backrest - remove these and if the car doesn’t have electrical rear seats, lift the backrest up about an inch and pull it right out. With electrical rear seats the centre seat squab and back-rest must be removed to expose two Torx screws securing the left and right rear back-rests at the centre top.

Remove Rear Seat Bench

There are two push buttons under the bottom lip of the leather where it meets the floor carpet - run your fingers along until you feel the recess and just push it in. Do this on both sides of the car, and the bench can be lifted out.