Rearview mirror: Difference between revisions
(update) |
(update) |
||
| Line 1: | Line 1: | ||
==Location== | |||
<!-- GF68.49-P-2100-01S Interior rearview mirror unit, location --> | <!-- GF68.49-P-2100-01S Interior rearview mirror unit, location --> | ||
The interior rearview mirror unit (A67) is located on the overhead control panel | The interior rearview mirror unit (A67) is located on the overhead control panel | ||
control module (N70) centered at front of the headliner. | control module (N70) centered at front of the headliner. | ||
{| | |||
|[[File:W220_interior_rearview_mirror_location.png]] | |||
| | |||
* A67 - Interior rearview mirror unit | * A67 - Interior rearview mirror unit | ||
* N70 - Overhead control panel control module | * N70 - Overhead control panel control module | ||
|} | |||
<!-- GF68.49-P-2100-02S Inside rearview mirror, design --> | <!-- GF68.49-P-2100-02S Inside rearview mirror, design --> | ||
==Design== | |||
{| | |||
| | |||
* A67 - Inside rearview mirror | * A67 - Inside rearview mirror | ||
* A67e1 - Left reading lamp | * A67e1 - Left reading lamp | ||
| Line 24: | Line 25: | ||
* A67r1 - Vertical position potentiometer | * A67r1 - Vertical position potentiometer | ||
* A67r2 - Horizontal position potentiometer | * A67r2 - Horizontal position potentiometer | ||
|[[File:W220_Inside_rearview_mirror_design.jpg]] | |||
|} | |||
<!-- GF68.49-P-2100-04S Inside rearview mirror, task --> | |||
The inside rearview mirror (A67) can be adjusted | |||
manually.Depending on the equipment, the manually adjusted | |||
mirror position can be stored, called up later with the memory | |||
function and actuated automatically. The mirror glass is electrochromatically dimmable. | |||
The inside rearview mirror (A67) in combination with the overhead | |||
control panel control module (N70) serves as master for dimming | |||
the electrically adjustable and heated left outside mirror (M21/1) | |||
(special equipment). | |||
<!-- GF68.49-P-2100-03S Inside rearview mirror, function --> | |||
The inside rearview mirror (A67) can be adjusted automatically | |||
with the memory function (depending on equipment), i.e. stored | |||
mirror position can be called upFor this purpose, two DC motors, a | |||
vertical adjustment motor (A67m1) and a horizontal adjustment | |||
motor (A67m2) are present in the housing actuated by the | |||
overhead control panel control module (N70). | |||
The vertical position potentiometer (A67r1) and horizontal position potentiometer (A67r2) | |||
are located next to the motors for position recognition. | |||
The mirror lens of the inside rearview mirror (A67) can be electrochromatically dimmed. | |||
Dimming is accomplished according to the | |||
variables measured by the mirror dimming forward sensor (A67h1) | |||
and mirror dimming backward sensor (A67h2). | |||
The left reading lamp (A67e1) and right reading lamp (A67e2) as | |||
well as the ambient light (A67e3) are also integrated in the mirror | |||
housing. | |||
Additional functions on vehicles as of 1.9.03 with telephone | |||
or with telephone and voice control system (VCS): | |||
A hands-free system microphone group (A67b1) is integrated in the | |||
inside rearview mirror (A67). | |||
The following functions can be performed via the hands-free | |||
system microphone group (A67b1): | |||
* Voice input for making telephone calls using the hands-free system | |||
* Voice input for voice control system (VCS) (interactive dialog with VCS) | |||
The signals are transmitted to the hands-free system control | |||
module (A35/1) or the voice control module (A35/11) via the | |||
hands-free system microphone group (A67b1). | |||
<!-- GF68.49-P-0003S, Automatic dimming interior rearview mirror, function --> | |||
Function prerequisites | |||
* No voltage or voltage too low | |||
* C. 15R or C. 15 ON | |||
Function | |||
The interior rearview mirror unit (A67) can be dimmed electrochromatically. | |||
For this purpose, a layer of electrolyte gel is located in the mirror | |||
glass between the reflector and the cover lens. | |||
Voltage connected to the gel modifies its permeability to light. | |||
The light reaching the surface of the mirror is reflected to a greater | |||
or lesser extent due to the magnitude of the actuating voltage. | |||
The actuating voltage is controlled by the electronic circuitry in the | |||
interior rearview mirror. | |||
This procedure is subject to the ambient light and the light reaching the mirror. | |||
These two input variables are sensed by the ambient light sensor (A67h2) | |||
in the mirror housing (rear side) and the automatic dimming interior | |||
rearview mirror sensor (A67h1) in the mirror glass of the interior rearview | |||
mirror unit (A67). | |||
If an interior light is switched on or the reverse gear (CAN | |||
message) is engaged, the interior rearview mirror is always | |||
switched to a brighter setting.This is accomplished by an additional | |||
signal lead from the overhead control panel control module | |||
(N70) to the interior rearview mirror unit (A67) . | |||
The interior rearview mirror unit (A67) serves also as master | |||
for the automatic dimming exterior rearview mirror (driver's side). | |||
<!-- GF68.49-P-0003S, Automatic dimming interior rearview mirror, function --> | |||
The ambient lamp (A67e3) is a bright LED located in the interior | |||
rear view mirror (A67). It serves for illumination of the center | |||
console. | |||
Switching ambient lamp on/off | |||
The ambient lamp is switched on automatically when c.15r | |||
switched on and switched off automatically when c.15r is | |||
switched off. | |||
Control | |||
The ambient lamp (A67e3) is controlled directly by the overhead | |||
control panel control module (N70). The overhead control panel | |||
control module (N70) receives the information "Status c.15r" for | |||
this purpose via the CAN bus from the electronic ignition/starter | |||
switch control module (N73). | |||
The ambient lamp is independent of the automatic light | |||
switch daylight sensor (B32/1) and the position of the door | |||
contact ON and OFF switch (N70s3). | |||
<!-- SI68.40-P-0001A, 17.06.2004, Service Information: Discontinuation of memory feature in inside rearview mirror. --> | |||
220.### ## as of 392659 with CODE (275a) Memory package (driver's seat, steering column, mirrors. | |||
The memory feature for the electrical inside rearview mirror can lo | |||
longer be ordered and is no longer installed in the series | |||
production of the models specified above. | |||
Inform customer that this function is no longer part of the memory feature (seat adjustment, steering wheel height adjustment and outside mirror adjustment). The current price list can be used to support this statement. | |||
<!-- GF88.79-P-2003S, Automatic dimming feature for exterior rearview mirror on driver's side, 6.4.98 --> | |||
220.063 /065 with CODE (249b) Automatic dimming interior and exterior (driver-side) rearview mirrors | |||
Driver-side exterior rearview mirror automatic dimming feature | |||
1 - CAN-message: "Shift lever position" | |||
2 - CAN-message: "Reverse gear engaged" | |||
A67 - Interior rearview mirror unit | |||
M21/1 - Left electrically adjustable and heated exterior rearview mirror | |||
M21/2 - Right electrically adjustable and heated exterior rearview mirror | |||
N15/5 - Electronic shift lever module control module | |||
N70 - Overhead control panel control module | |||
N73 - Electronic ignition/starter switch control module | |||
[[File:W220_mirror_automatic_dimming_feature.png]] | |||
Function prerequisites | |||
* Voltage not too low or too high | |||
* C. 15R or c.15 ON | |||
Function | |||
The mirror glass in the exterior rearview mirror on the driver's side | |||
can be dimmed electro-chromatically. For this purpose a layer of | |||
electrolytic gel is located in the mirror glass between the reflector | |||
and cover glass. When a voltage is supplied to this gel it changes | |||
its permeability to light. | |||
The light reaching the surface of the mirror is reflected to a greater | |||
or lesser extent depending on the magnitude of the control | |||
voltage. The control voltage is regulated by the interior rearview | |||
mirror unit (A67) (master) and the overhead control panel | |||
control module (N70). Two discrete leads are connected to the | |||
left front door control module (N69/1) for this purpose (vehicles | |||
with right-hand steering: right front door control module ((N69/2)). | |||
Regulation is accomplished depending on the ambient light and | |||
the light reaching the mirror. These two variables are measured by | |||
the ambient light sensor (A67h2) in the interior rearview mirror | |||
housing (rear) and the automatic dimming interior rearview | |||
mirror sensor (A67h1) in the mirror glass in the interior rearview | |||
mirror unit. | |||
If one of the interior lights is switched on or the CAN message | |||
"Reverse gear engaged" is received from the electronic ignition/ | |||
starter switch control module (N73), the exterior rearview mirror | |||
as well as interior rearview mirror become brighter. | |||
==Hands-free system microphone group== | |||
<!-- GF68.49-P-2100-02S Inside rearview mirror, design --> | |||
Additional equipment on vehicles as of 1.9.03 with telephone or with telephone and | Additional equipment on vehicles as of 1.9.03 with telephone or with telephone and | ||
voice control system (VCS) | voice control system (VCS) | ||
| Line 32: | Line 187: | ||
[[File:W220_Hands-free_system_microphone_group.jpg]] | [[File:W220_Hands-free_system_microphone_group.jpg]] | ||
==Removing inside rearview mirror== | |||
<!-- AR68.40-P-0001M, Removing and installing inside rearview mirror --> | |||
{| | |||
|[[File:W220_removing_rearview_mirror_1.jpg]] | |||
|[[File:W220_removing_rearview_mirror_2.jpg]] | |||
| | |||
* 1 - Inside rearview mirror | |||
* 2 - Paneling | |||
* 3 - Paneling | |||
* 4 - Retaining plate | |||
|} | |||
# Remove [[Overhead_Control_Panel_(OCP)_(N70)|overhead control panel]] control module with front dome lamp | |||
# Unclip paneling (2) on inside rearview mirror | |||
# Remove paneling (3) | |||
# Remove inside rearview mirror (1) by inserting screwdriver between inside rearview mirror (1) and retaining plate (4) and prying out inside rearview mirror | |||
# Install in opposite order | |||
Revision as of 19:29, 5 November 2016
Location
The interior rearview mirror unit (A67) is located on the overhead control panel control module (N70) centered at front of the headliner.
|
|
Design
|
|
The inside rearview mirror (A67) can be adjusted manually.Depending on the equipment, the manually adjusted mirror position can be stored, called up later with the memory function and actuated automatically. The mirror glass is electrochromatically dimmable.
The inside rearview mirror (A67) in combination with the overhead control panel control module (N70) serves as master for dimming the electrically adjustable and heated left outside mirror (M21/1) (special equipment).
The inside rearview mirror (A67) can be adjusted automatically with the memory function (depending on equipment), i.e. stored mirror position can be called upFor this purpose, two DC motors, a vertical adjustment motor (A67m1) and a horizontal adjustment motor (A67m2) are present in the housing actuated by the overhead control panel control module (N70). The vertical position potentiometer (A67r1) and horizontal position potentiometer (A67r2) are located next to the motors for position recognition. The mirror lens of the inside rearview mirror (A67) can be electrochromatically dimmed. Dimming is accomplished according to the variables measured by the mirror dimming forward sensor (A67h1) and mirror dimming backward sensor (A67h2). The left reading lamp (A67e1) and right reading lamp (A67e2) as well as the ambient light (A67e3) are also integrated in the mirror housing.
Additional functions on vehicles as of 1.9.03 with telephone or with telephone and voice control system (VCS): A hands-free system microphone group (A67b1) is integrated in the inside rearview mirror (A67). The following functions can be performed via the hands-free system microphone group (A67b1):
- Voice input for making telephone calls using the hands-free system
- Voice input for voice control system (VCS) (interactive dialog with VCS)
The signals are transmitted to the hands-free system control module (A35/1) or the voice control module (A35/11) via the hands-free system microphone group (A67b1).
Function prerequisites
- No voltage or voltage too low
- C. 15R or C. 15 ON
Function The interior rearview mirror unit (A67) can be dimmed electrochromatically. For this purpose, a layer of electrolyte gel is located in the mirror glass between the reflector and the cover lens. Voltage connected to the gel modifies its permeability to light. The light reaching the surface of the mirror is reflected to a greater or lesser extent due to the magnitude of the actuating voltage. The actuating voltage is controlled by the electronic circuitry in the interior rearview mirror. This procedure is subject to the ambient light and the light reaching the mirror.
These two input variables are sensed by the ambient light sensor (A67h2) in the mirror housing (rear side) and the automatic dimming interior rearview mirror sensor (A67h1) in the mirror glass of the interior rearview mirror unit (A67).
If an interior light is switched on or the reverse gear (CAN message) is engaged, the interior rearview mirror is always switched to a brighter setting.This is accomplished by an additional signal lead from the overhead control panel control module (N70) to the interior rearview mirror unit (A67) .
The interior rearview mirror unit (A67) serves also as master for the automatic dimming exterior rearview mirror (driver's side).
The ambient lamp (A67e3) is a bright LED located in the interior
rear view mirror (A67). It serves for illumination of the center
console.
Switching ambient lamp on/off
The ambient lamp is switched on automatically when c.15r
switched on and switched off automatically when c.15r is
switched off.
Control The ambient lamp (A67e3) is controlled directly by the overhead control panel control module (N70). The overhead control panel control module (N70) receives the information "Status c.15r" for this purpose via the CAN bus from the electronic ignition/starter switch control module (N73).
The ambient lamp is independent of the automatic light switch daylight sensor (B32/1) and the position of the door contact ON and OFF switch (N70s3).
220.### ## as of 392659 with CODE (275a) Memory package (driver's seat, steering column, mirrors.
The memory feature for the electrical inside rearview mirror can lo longer be ordered and is no longer installed in the series production of the models specified above.
Inform customer that this function is no longer part of the memory feature (seat adjustment, steering wheel height adjustment and outside mirror adjustment). The current price list can be used to support this statement.
220.063 /065 with CODE (249b) Automatic dimming interior and exterior (driver-side) rearview mirrors
Driver-side exterior rearview mirror automatic dimming feature
1 - CAN-message: "Shift lever position"
2 - CAN-message: "Reverse gear engaged"
A67 - Interior rearview mirror unit
M21/1 - Left electrically adjustable and heated exterior rearview mirror
M21/2 - Right electrically adjustable and heated exterior rearview mirror
N15/5 - Electronic shift lever module control module
N70 - Overhead control panel control module
N73 - Electronic ignition/starter switch control module
Function prerequisites
- Voltage not too low or too high
- C. 15R or c.15 ON
Function The mirror glass in the exterior rearview mirror on the driver's side can be dimmed electro-chromatically. For this purpose a layer of electrolytic gel is located in the mirror glass between the reflector and cover glass. When a voltage is supplied to this gel it changes its permeability to light. The light reaching the surface of the mirror is reflected to a greater or lesser extent depending on the magnitude of the control voltage. The control voltage is regulated by the interior rearview mirror unit (A67) (master) and the overhead control panel control module (N70). Two discrete leads are connected to the left front door control module (N69/1) for this purpose (vehicles with right-hand steering: right front door control module ((N69/2)).
Regulation is accomplished depending on the ambient light and the light reaching the mirror. These two variables are measured by the ambient light sensor (A67h2) in the interior rearview mirror housing (rear) and the automatic dimming interior rearview mirror sensor (A67h1) in the mirror glass in the interior rearview mirror unit.
If one of the interior lights is switched on or the CAN message "Reverse gear engaged" is received from the electronic ignition/ starter switch control module (N73), the exterior rearview mirror as well as interior rearview mirror become brighter.
Hands-free system microphone group
Additional equipment on vehicles as of 1.9.03 with telephone or with telephone and voice control system (VCS) A67b1 - Hands-free system microphone group
Removing inside rearview mirror
|
|
|
- Remove overhead control panel control module with front dome lamp
- Unclip paneling (2) on inside rearview mirror
- Remove paneling (3)
- Remove inside rearview mirror (1) by inserting screwdriver between inside rearview mirror (1) and retaining plate (4) and prying out inside rearview mirror
- Install in opposite order