Remove/install bottom engine compartment paneling

From W220 S-Class Encyclopedia
Revision as of 00:20, 30 June 2018 by Pokseva (talk | contribs) (Created page with "<!-- AR61.20-P-1105M Remove/install bottom engine compartment paneling 6.12.07 MODEL 215, 220 Vehicles with gasoline engine --> ==Remove/install bottom engine compartment pan...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search


Remove/install bottom engine compartment paneling

  1. On vehicles with fire extinguishing system: remove fire extinguisher system motor temperature sensor (B65) from center engine compartment paneling. Failure to observe can lead to actuation of fire extinguishing system!
  2. Remove bolts (1) and remove lower engine compartment paneling. Removal sequence:
    1. rear engine compartment paneling
    2. center engine compartment paneling
    3. front right engine compartment paneling (A)
    4. front left engine compartment paneling (B).
  3. Install in the reverse order. Installation: Install front right and left engine compartment paneling (A, B) so that the rubber lips are covered by the bumper.

Rear engine compartment paneling

  • 1 - Screw


  • B65 - Engine fire extinguishing system temperature sensor

Center engine compartment paneling

  • 1 - Screw

Front engine compartment paneling

  • 1 - Screw
  • A - Front right engine compartment paneling
  • B - Front left engine compartment paneling


Clip nut fastener (A0049943145) x4
Retrieved from "https://w220.wiki/index.php?title=Remove/install_bottom_engine_compartment_paneling&oldid=7353"