Remove/install accelerator pedal: Difference between revisions
Jump to navigation
Jump to search
(Created page with "==Remove/install accelerator pedal== <!-- AR30.12-P-1321I, Remove/install accelerator pedal, 30.10.08, MODEL 220, 215, 230 --> {| |File:W220_remove_install_accelerator_peda...") |
No edit summary |
||
| Line 11: | Line 11: | ||
# Remove key from electronic ignition switch (EIS). Vehicles with code (889) Keyless-Go: Switch engine off, remove Keyless-Go cards from the vehicle and store outside of the transmitter range. | # Remove key from electronic ignition switch (EIS). Vehicles with code (889) Keyless-Go: Switch engine off, remove Keyless-Go cards from the vehicle and store outside of the transmitter range. | ||
# Remove front left covering under dashboard. | # [[Removing and installing cover below instrument panel (left)|Remove front left covering under dashboard]]. | ||
# Remove mounting nut (arrow) from accelerator pedal (33). The accelerator pedal must not be disassembled otherwise it can get damaged. Installation: Accelerator pedal must be inserted with front guide lug (arrow) into firewall. | # Remove mounting nut (arrow) from accelerator pedal (33). The accelerator pedal must not be disassembled otherwise it can get damaged. Installation: Accelerator pedal must be inserted with front guide lug (arrow) into firewall. | ||
# Detach connector from accelerator pedal sensor (B37) | # Detach connector from accelerator pedal sensor (B37) | ||
# Detach connector from kickdown switch (S16/6) | # Detach connector from kickdown switch (S16/6) | ||
# Install in the reverse order | # Install in the reverse order | ||
Latest revision as of 12:19, 22 April 2017
Remove/install accelerator pedal
|
|
- Remove key from electronic ignition switch (EIS). Vehicles with code (889) Keyless-Go: Switch engine off, remove Keyless-Go cards from the vehicle and store outside of the transmitter range.
- Remove front left covering under dashboard.
- Remove mounting nut (arrow) from accelerator pedal (33). The accelerator pedal must not be disassembled otherwise it can get damaged. Installation: Accelerator pedal must be inserted with front guide lug (arrow) into firewall.
- Detach connector from accelerator pedal sensor (B37)
- Detach connector from kickdown switch (S16/6)
- Install in the reverse order