Removing and installing front floor covering (left): Difference between revisions

From W220 S-Class Encyclopedia
Jump to navigation Jump to search
(Created page with "==Removing and installing front floor covering (left)== <!-- AR68.20-P-2050M, MODEL 215, 220, Removing and installing front floor covering (left), 8.12.97 --> {| |File:W220...")
 
 
(3 intermediate revisions by the same user not shown)
Line 14: Line 14:
|}
|}


# Remove front seat (W220)
# Move front seat back as far as possible
# Move front seat back as far as possible (W215)
# [[Removing and installing cover below instrument panel (left)|Remove cover below instrument panel (left)]]
# Remove cover below instrument panel (left)
# Pull off door sill molding (2). Door sill molding fastened with 3 clips.
# Pull off door sill molding (2). Door sill molding fastened with 3 clips.
# Pull off edge guard (1) in lower area on A-pillar
# Pull off edge guard (1) in lower area on A-pillar
# Remove panel (4). Fastened with 2 clips in addition.
# Remove panel (4). Fastened with 2 clips in addition.
# Remove accelerator pedal (6)
# [[Remove/install accelerator pedal|Remove accelerator pedal (6)]]
# Lift floor covering (7) at rear, remove at center console and then remove towards rear. Installation: Insert floor covering (8) in area of center console (arrows).
# Lift floor covering (7) at rear, remove at center console and then remove towards rear. Installation: Insert floor covering (8) in area of center console (arrows).
# Install in opposite order
# Install in opposite order
{|
|[[File:W220_door_still_molding_front_left.jpg|thumb|none|Door still molding.]]
|[[File:W220_A2206802780_front_left_lateral_panel_cover.jpg|thumb|none|Side panel.]]
|[[File:W220_left_footwell_floor_covering_removed.jpg|thumb|none|Floor covering removed.]]
|}

Latest revision as of 01:00, 23 April 2017

Removing and installing front floor covering (left)

  • 1 - Edge guard
  • 2 - Door sill molding
  • 3 - Clip
  • 4 - Panel
  • 5 - Clip
  • 6 - Accelerator pedal
  • 7 - Floor covering
  1. Move front seat back as far as possible
  2. Remove cover below instrument panel (left)
  3. Pull off door sill molding (2). Door sill molding fastened with 3 clips.
  4. Pull off edge guard (1) in lower area on A-pillar
  5. Remove panel (4). Fastened with 2 clips in addition.
  6. Remove accelerator pedal (6)
  7. Lift floor covering (7) at rear, remove at center console and then remove towards rear. Installation: Insert floor covering (8) in area of center console (arrows).
  8. Install in opposite order
Door still molding.
Side panel.
Floor covering removed.
Retrieved from "https://w220.wiki/index.php?title=Removing_and_installing_front_floor_covering_(left)&oldid=6235"