Removing and installing front floor covering (left): Difference between revisions
Jump to navigation
Jump to search
(Created page with "==Removing and installing front floor covering (left)== <!-- AR68.20-P-2050M, MODEL 215, 220, Removing and installing front floor covering (left), 8.12.97 --> {| |File:W220...") |
|||
| Line 16: | Line 16: | ||
# Remove front seat (W220) | # Remove front seat (W220) | ||
# Move front seat back as far as possible (W215) | # Move front seat back as far as possible (W215) | ||
# Remove cover below instrument panel (left) | # [[Removing and installing cover below instrument panel (left)|Remove cover below instrument panel (left)]] | ||
# Pull off door sill molding (2). Door sill molding fastened with 3 clips. | # Pull off door sill molding (2). Door sill molding fastened with 3 clips. | ||
# Pull off edge guard (1) in lower area on A-pillar | # Pull off edge guard (1) in lower area on A-pillar | ||
# Remove panel (4). Fastened with 2 clips in addition. | # Remove panel (4). Fastened with 2 clips in addition. | ||
# Remove accelerator pedal (6) | # [[Remove/install accelerator pedal|Remove accelerator pedal (6)]] | ||
# Lift floor covering (7) at rear, remove at center console and then remove towards rear. Installation: Insert floor covering (8) in area of center console (arrows). | # Lift floor covering (7) at rear, remove at center console and then remove towards rear. Installation: Insert floor covering (8) in area of center console (arrows). | ||
# Install in opposite order | # Install in opposite order | ||
Revision as of 12:21, 22 April 2017
Removing and installing front floor covering (left)
|
|
- Remove front seat (W220)
- Move front seat back as far as possible (W215)
- Remove cover below instrument panel (left)
- Pull off door sill molding (2). Door sill molding fastened with 3 clips.
- Pull off edge guard (1) in lower area on A-pillar
- Remove panel (4). Fastened with 2 clips in addition.
- Remove accelerator pedal (6)
- Lift floor covering (7) at rear, remove at center console and then remove towards rear. Installation: Insert floor covering (8) in area of center console (arrows).
- Install in opposite order